General

• Linefill (Bbl/mile) for any diameter pipe.
• Horsepower (BPH) for pumps, knowing system efficiency, pressure differential, flow rate, etc.
• Vapor Pressure (psia) for various light hydrocarbons.
• Determining hydrotest pressure.
• Allowable distance between pipe supports, varied by pipe size, diameter, etc.

Piping Design

• Pipe size data sheets.
• Pipe fitting size data sheets.
• 90 degree, long radius, std. wall elbows
• 90 degree, long radius, heavy wall elbows
• 90 degree, long radius, extra heavy wall elbows
• 90 degree, short radius, std. wall elbows
• 90 degree, short radius, heavy wall elbows
• 90 degree, long radius, std. wall reducing elbows
• 90 degree, long radius, heavy wall reducing elbows
• 45 degree, long radius, std. wall elbows
• 45 degree, long radius, heavy wall elbows
• 45 degree, long radius, extra heavy wall elbows
• std. wall, straight tee
• heavy wall, straight tee
• extra heavy wall, straight tee
• std. wall, reducing tee
• heavy wall, reducing tee
• long radius, 180 degree, std. wall return
• long radius, 180 degree, heavy wall return
• short radius, 180 degree, std. wall return
• short radius, 180 degree, heavy wall return
• ANSI valve dimensions.

Hydraulics

• Shell-MIT Steady State Hydraulic Spreadsheet
• Darcy-Weisbach Steady State Hydraulic Spreadsheet
• Viscosity conversions
• Determining hydrotest pressure.
• Looped lines
• Pressure loss per mile chart
• Water
• Unleaded
• Fuel Oil
• Kerosene
• Heavy Crude
• Mid-Grade Crude
• Light Crude
• Propane
• Butane
• Velocity (ft./sec.) in pipe at various flow rates and diameters.
• Fluid properties for various refined products.

In-Line Inspection

• Questionaire worksheet for ILI tool runs
• Minimum bend radius for ILI tools
• Trap lengths to handle most ILI tools
• Remaining Strength of Pipe Containing Smooth Metal Loss Anomaly
• B31G Allowable Length of Metal Loss Tables
• B31G Calculation
• 0.85dL Allowable Length of Metal Loss Tables
• 0.85dL Calculation

Cost Estimating

• Cost per inch diameter per foot new construction, ROT
• Cost per inch diameter per foot conventional bore, ROT
• Cost per inch diameter per foot HDD, ROT
• Cost per mile smart pigging, various tools.
• Cost per inch diameter per foot, line lowering.
• Cost per inch diameter per foot, various coating systems.
• Various material costs